Shanghai Yieson Machine Co.,Ltd.

Home About Us

Shanghai Yieson Machine Co., Ltd. Quality Control

Certification
Good quality Mobile Kitchen Concession Trailer for sales
Good quality Mobile Kitchen Concession Trailer for sales
I'm Online Chat Now
QC Profile
Chassis QC Checklist - Chassis and tanks Chassis Number:
Suspension hanger bolts  x 8 Check Nyloc nuts can be done up enough
Suspension hanger grease nipples x 6 Check these are correctly tightened
  Lubricated with blue grease
Suspension hanger swing arm bolt Check these have cotter pin
Axle U bolts x 8 Make sure these are straight and virticle (i.e. evenly tightened is important)
  Appy Lanotec for rust treatment
   
Axle U bolt flat washers x 8 Fitted
Axle U bolt spring washers x 8 Fitted
Tow coupling mounting bolts x 4 8.8 high tensile bolts
  galvanised
Tow coupling flat washers x 8 (top and bottom) 8.8 high tensile flat washers
  galvanised
Tow coupling spring washers x 4 8.8 high tensile spring washers
  galvanised
Draw bar - mounting bolts x 6 8.8 high tensile bolts x 6
  galvanised
Draw bar - mounting washers x 6 8.8 high tensile flat washers
  galvanised
Draw bar - mounting spring washers x 6 8.8 high tensile spring washers
Draw bar -  spacer tubes Paint protection
Draw bar mount - nuts Paint protection
  High tensile
Handbrake adjust to work in first three clicks please
Handbrake adjuster Make sure this is not bent 
   
Brake cable brackets on drawbar Brackets welded straight
  Bracket welds have Lanotec rust treatmant
Brake cable Front threaded tubes are adjusted fully forward
  Rubber dust boots correctly mounted
  Not rubbing on road wheels
Brake cable brackets on chassis Correctly positioned
  Lanotech rust protection
Brake cable actuators Threaded tube mounted forward
  2 x nuts and 2 x flat washers correctly fitted and tight
  8mm cap screw and nyloc nut installed
  Threaded cable end must not rub on brake lever
  Minimum 10mm free cable 
Stabiliser legs Installed straight please
  Leg not bent
  Handle not bent
  Winder working correctly
  Welds have paint protection and Lanotech lubrication
Chassis corners cut at 25mm Checked
Front cross member ends capped and welded Checked
Water tank Height and position is correct
  Padding is installed on top of tank
  Filler is on correct side
Fuel tank Height and position is correct
  Padding is installed on top of tank
  Filler is on correct side
  Sender wiring is accessible
Water tank mounting bolts x 8 Galvanised
Water tank mounting washers x 8 Galvanised
Water tank mounting nuts Nyloc nuts
Safety chains x 2 15 links
  Marked with "AS4177-25" every 3rd link
  Located correctly
  Welds have paint protection with Lanotech
Jockey wheel Cut bolt ends have paint protection with Lanotec
  Dust cap installed
Trailer lighting cable Australian colour cable
  14 x 0.32 conductor 10A conductors
Electric brake power cable Installed and correctly terminated to brakes
  Installed in black conduit
  Steel conduits are correct length
Road wheels Correct rims (standard/sports)
  Correct rim and tyre size for model
  Matching tyres
  Bearing dust caps x 4
Welds Even and clean
  Paint protection with Lanotec
   
Mechanical brake/single axle designs  
Tow coupling grease nipples x 2 Lubricated with blue grease
Suspension grease nipples x 4 Lubricated with blue grease
  Correctly tightened
Brake caliper guide bolts Lubricated with white grease
FINAL SIGNOFF  
Certifications
  • Standard:CE

    Number:WM120703/SYM762

    Issue Date:2012-07-03

    Expiry Date:2017-07-02

    Scope/Range:MOBILE FOOD VEHICLE

    Issued By:ENTE CERTIFICAZIONE MACCHINE

  • Standard:ISO9001

    Number:00914Q11856RIS

    Issue Date:2014-12-16

    Expiry Date:2017-12-15

    Scope/Range:Manufacturing and Service Food Machinery Equipment

    Issued By:CHINA GREAT WALL QUALITY ASSURANCE CENTRE

Contact Details
Shanghai Yieson Machine Co., Ltd.

Contact Person: Mrs. Jane Wang

Tel: 86-21-57406898

Fax: 86-21-57406662

Send your inquiry directly to us (0 / 3000)